Hardware and Netting for BayNets Safety Systems®

BayNets provide an easy, effective tool for open pit safety and promote safer work habits in the hazardous area of your service center.

BayNets are designed to catch and cradle a person falling into the floor opening. They are fabricated of specially treated, petroleum-resistant synthetic net, installed with aircraft cable and hardware. Once installed, the BayNets Safety System® has a tensile strength of over 3 tons.

InCord Netting Hardware - Wire Rope Cables

Wire Cable Length
Attached To Pad Eye

InCord Netting Hardware - Rope Netting Links

Quick Links

InCord Netting Hardware - Cable Claps & Thimbles

Cable Clamps (6)
Thimbles (2)

InCord Netting Hardware - Net Snaphooks

SnapHooks

InCord Netting Hardware - Net Turnbuckles

Turnbuckles

InCord Netting Hardware - Net Padeyes

Pad Eyes

InCord Netting Hardware - Drain Pan Assembly Anchor

Drain Pan
Anchor Assembly

InCord Netting Hardware - Knotless Black Mesh Net

N820H

BayNets Safety System® helps you meet OSHA regulations – at a lower cost than other safety systems.
You know you need to install a safety system. BayNets is the answer.
Click Request A Quote to access all the information you need to complete your job.
See our System Configurations if you are not sure which BayNets Safety System® to order.

BayNets Materials

N820BK

N820 BKView Specs

Get Your BayNets Quote

    Name*

    Company*

    Address*

    Address 2

    City*

    State*

    Zip*

    Phone*

    Fax

    Email Address*

    Is this location a government facility? *
    YesNo

    Number of pits at the same size?

    Exact internal width at top of pit where hardware will be mounted

    ExactInternal length at top of pit where hardware will be mounted

    Is there a catwalk (crossover) across the pit? *
    YesNo

    Are there stairs into the bay? *
    YesNo

    Is there steel along the total length of both sides of the bay, on the top where the hardware will be welded? *
    YesNo

    Do you have an oil drain pan or rolling jack? *
    YesNo

    If you have an oil drain pan or rolling jack, what is the length of the drain pan/jack in relation to length of the pit? *

    Is the drain pan/rolling jack recessed at least 4" from the top of the pit, or are the drain pan wheels at least 4” from the side of the pit? *
    YesNo

    Do you need a complete system with netting and hardware? *
    YesNo

    Get a Quote Baynets Form

    Contact BayNets Sales

      Name *

      Company

      Email *

      State *

      Message

      Need a custom safety netting quote? Want to view our materials? Need more specs? Any other questions?

      Get a Quote
      Contact Sales
      View Materials
      Explore Markets